LifeCode

HOW TO PLAY Each day begins at 10:00 AM at your base. Your first task is to adjust the antenna angle. The more accurate the alignment, the more memory you will receive during the export process. After that, enter the laboratory and locate an M3N (Memory Export Node). Activate the first export phase. A single M3N operates for 2 to 5 minutes depending on conditions. While the M3N is running, explore the laboratory, gather resources, and avoid hostile monsters. Once the memory bar is filled, return to the base and activate a Control Core function. Afterward, you will need to fill the memory bar again, this time to a higher requirement. When the M3N finishes operating, you can activate Phase Two. This phase provides additional memory and helps complete your objectives more quickly. However, always keep an eye on the clock. You must leave the laboratory before midnight. If you remain inside after 12:00 AM, your character will die and all collected items and stored memory will be lost. If you forget to check the time, don't worry. At 11:00 PM, a warning siren will sound throughout the laboratory, alerting you that midnight is approaching. At the same time, emergency lights will illuminate the facility, helping you find the exit and return to base before it is too late. CONTROLS Pause / Menu - [P] Move Forward - [W] Move Left - [A] Move Backward - [S] Move Right - [D] Jump - [SPACE] Run - [LSHIFT] Interact - [E] Slot 1 - [NUM1] Slot 2 - [NUM2] Slot 3 - [NUM3] Slot 4 - [NUM4] Slot 5 - [NUM5] Left Hand Punch - [Z / LMB] Right Hand Punch - [X / RMB] Turn On / Use - [F] Turn Off - [C] Drop Item - [Q]